Menu

Rack attachments by upright and hole pattern

Rack attachments that fit your exact rack

Pick your rack system to see the maker's upright size, hole diameter, hardware size and hole spacing, the attachments it lists or excludes, and what it does not publish.

Find your rack systemWhere the facts come from

Find your rack system

Shows what your rack maker publishes about its fit numbers and attachments, so you can match an attachment to your exact rack.

Choose your rack system to see the key facts and what fits. Each fact links to its source on the full page.

All rack systems

Start here

Our top pick for the most common fits. Each one says who it suits and links to the research behind it.

All best picks

We may earn a commission if you buy through links on this page. How we make money

Find your upright size

Pick an upright size to see the hole diameters and spacing it comes with, how to measure your own rack, and the attachments made for it.

All upright sizes

Choose your upright size to see the key facts and what fits. Each fact links to its source on the full page.

All upright sizes

Start with what you need to do

Tools, shortlists and comparisons

More by topic
ToolUpright size finder: 2x2, 2x3, 3x3, 60 mm or 75 mmTurns your measured upright size into the hole and pin sizes makers list for it and the rack systems that use it, without treating conversions as fit.Open →
ShortlistJ-cups for 2x2 and 2x3 uprights with the pin size statedHelps a 2x2 or 2x3 rack owner pick J-cups made for their tube and hole size, with the rating in the maker's scope.Open →
ShortlistDip attachments with a stated rating and host listHelps you pick a dip attachment its maker lists for your rack, with the rating and lock stated, and the variant to choose.Open →
ShortlistRack landmines with a stated rating and a locking pinHelps you pick a rack landmine that its maker rates, pins to your upright and lists for your rack.Open →
ShortlistRack pins with the diameter and shaft length statedHelps you pick a replacement or extra pin made for your rack's hole size and line, with the shaft length stated.Open →
ShortlistRack plate storage with a stated per-peg ratingHelps you pick rack plate storage its maker rates per peg or holder and lists for your rack, with a sleeve that takes your plates.Open →

Common buying mistakes

  1. Shopping by brand name

    One brand sells several rack systems. REP lists the PR-1000 and PR-1100 with the same 2 x 2 in uprights but different hole spacing, and Titan says its T-2 monolift attachments do not fit T-2 racks made before October 2020. Find your model and year first.

  2. Reading the hole size as the pin size

    The hole in the upright and the pin on the attachment are two numbers. Titan lists 11/16 in holes on the T-3 but a 5/8 in pin for its T-3 J-hooks. Match the pin size and host list the attachment maker states.

  3. Adding or splitting load ratings

    "Per pair", "per peg", "combined" and "dynamic drop" mean different things. A 750 lb pair of J-cups plus a 650 lb set of safeties is not a 1,400 lb system. Use each maker's number only for the use the maker describes.

  4. Missing a maker's exclusion

    Makers rule out some of their own racks. Rogue says band pegs and Safety Spotter Arms should not be used with the RML-390F Flat Foot Monster Lite Rack. Read the attachment's host list and exclusions before you order.

Guides

All guides
GuideIdentify your power rack before buying any attachmentHelps you pin down the exact rack model, year and published specs before you choose any attachment.Read →
GuideHow to measure power rack uprights, holes and spacingHelps you record your rack's upright size, hole diameter and hole spacing correctly before you buy an attachment.Read →
GuidePower rack hole size vs pin size: two different numbersHelps you read a rack's hole size and an attachment's pin size without mixing them up.Read →
GuideJ-cup and rack attachment weight capacity: reading the ratingHelps a reader read an attachment's load rating in the maker's own scope instead of splitting, adding or recalculating it.Read →
GuideStrap safeties vs pin-pipe vs flip-down vs spotter armsHelps a rack owner choose a safety type by host list, mount, lock and the maker's own rating wording.Read →
GuideBuying rack attachments on Amazon or AliExpress: what to checkHelps you check a marketplace listing for a rack attachment before you order: right variant, real seller, workable returns.Read →

Recently updated

Glossary of 89 termsQuestions and answers

A barbell resting in a J-hook on a black rack upright with a row of round holes, a plate behind it against a bright window
Photo: Brett Jordan / Unsplash

How we choose

We start from your exact rack maker, model and year. Upright sizes, hole sizes, spacing, host lists and load ratings come from the makers' own pages, manuals and support answers, and every value is labeled with its source; where a maker publishes two figures we show both, and where it publishes none we say so. We list an attachment only when its maker names your rack system or upright size. A store's name alone does not show that the brand authorized it. Nothing here has been tested by us, and we never state a load rating the maker does not publish.

Read the full methodology