Tool · Measuring and buying
Rack attachment fit finder
Pick your rack system to see the maker's upright size, hole diameter, hardware size and spacing, the attachments it lists and excludes, and what is not published.
We may earn a commission if you buy through links on this page. How we make money
Short answer
Pick your rack system below to open its page: the maker's upright size, hole diameter, hardware size and hole spacing, the attachments the maker lists and excludes for it, and what no source publishes. Match an attachment to that page, not to a brand name or a tube size.
Picks this tool points toAll best picks
- Rogue Infinity and R-Series (2x3)
- Rogue Monster Lite racks
- Rogue SML-2 Monster Lite squat stand
- Rogue RML-390F Flat Foot Monster Lite rack
- Rogue Monster racks
- REP PR-1000 and PR-1050
- REP PR-1100
- REP PR-4000
- REP PR-5000
- Titan T-2 Series
- Titan T-3 Series
- Titan X-3 Series
- Titan TITAN Series
- Bells of Steel 60 mm racks
- Bells of Steel Hydra
- Bells of Steel Manticore
- PRx Profile ONE, PRO and CORE
- Force USA MyRack
- Powertec power racks and half racks
- Sunny Health & Fitness Power Zone racks
Choose your rack system to see the key facts and what fits. Each fact links to its source on the full page.
All rack systems
- Rogue Infinity and R-Series (2x3)
- Rogue Monster Lite racks
- Rogue SML-2 Monster Lite squat stand
- Rogue RML-390F Flat Foot Monster Lite rack
- Rogue Monster racks
- REP PR-1000 and PR-1050
- REP PR-1100
- REP PR-4000
- REP PR-5000
- Titan T-2 Series
- Titan T-3 Series
- Titan X-3 Series
- Titan TITAN Series
- Bells of Steel 60 mm racks
- Bells of Steel Hydra
- Bells of Steel Manticore
- PRx Profile ONE, PRO and CORE
- Force USA MyRack
- Powertec power racks and half racks
- Sunny Health & Fitness Power Zone racks
The numbers at a glance
| Rack system | Upright size | Hole diameter | Pin and bolt size | Hole spacing |
|---|---|---|---|---|
| Rogue Infinity and R-Series (2x3) | 2 x 3 in | Not confirmed | 5/8 in J-cup pin | Not confirmed |
| Rogue Monster Lite racks | 3 x 3 in (RML-690) | Not confirmed | 5/8 in bolts and fasteners (RML-690); 0.625 in pin on the Monster Lite Strap Safety System 2.0 brackets | Not confirmed |
| Rogue SML-2 Monster Lite squat stand | 3 x 3 in | 5/8 in, laser-cut | 5/8 in bolts, fasteners and J-cup pins | Westside: 1 in through the bench and clean-pull zone, 2 in above and below |
| Rogue RML-390F Flat Foot Monster Lite rack | Not confirmed | Not confirmed | Not confirmed | Not confirmed |
| Rogue Monster racks | 3 x 3 in (RM-6) | Not confirmed | 1 in hardware (RM-6); 1 in pin on the Monster Safety Strap 2.0 and on the 1 in version of the Ghost Roller J-Cups 2.0 | 2 in (Rogue's general FAQ answer for Monster Series uprights) |
| REP PR-1000 and PR-1050 | 2 x 2 in (PR-1000) | Not confirmed | 1 in pins on the 1000 Series standard J-cups | 2 in (PR-1000) |
| REP PR-1100 | 2 x 2 in | Not confirmed | 1 in pins on the 1000 Series standard J-cups | 3 in |
| REP PR-4000 | 3 x 3 in | 18 mm, per REP's ISO arm FAQ (PR-4000 version of the arms) | 5/8 in hardware; 5/8 in pins on the 4000 Series Round Sandwich J-cups | 2 in, with 1 in within the bench zone |
| REP PR-5000 | 3 x 3 in | 27 mm, per REP's ISO arm FAQ (PR-5000 V2 version of the arms) | 1 in hardware | 2 in |
| Titan T-2 Series | 2 x 2 in | 26 mm in Titan's spec table; 1 in in its description | Not confirmed | 2 in on center; Titan says some sections between holes measure 1 in. Titan does not mark the T-2 as Westside. |
| Titan T-3 Series | 2 x 3 in | 11/16 in | 5/8 in pin on the T-3 J-hooks (JHOOK_T3, SKU 401348); 5/8 in (16 mm) pin on the pin and pipe safety; a 5/8 in quick pin listed on Titan's T-3 accessory page | Westside through the bench and clean-pull zone, 2 in above and below |
| Titan X-3 Series | 3 x 3 in | 11/16 in | 5/8 in (16 mm) pin on the pin and pipe safety; 5/8 in pin listed for the SNDJHOOK_X3 J-hook | Bolt-down uprights: Westside through the bench and clean-pull zone, 2 in above and below. Folding rack page: 2 in on center with Westside spacing throughout the front. |
| Titan TITAN Series | 3 x 3 in | 1 in keyholes | Not confirmed | Not confirmed |
| Bells of Steel 60 mm racks | 60 x 60 mm, labeled 2.3 x 2.3 in by Bells of Steel | 5/8 in (per Bells of Steel's Sandwich J-cup listing) | Not confirmed | Not confirmed |
| Bells of Steel Hydra | 3 x 3 in (Bells of Steel prints 76.2 x 76.2 mm) | 5/8 in | Not confirmed | Not confirmed |
| Bells of Steel Manticore | 3 x 3 in (Bells of Steel prints 76.2 x 76.2 mm) | 1 in, combined with a 5/8 in opening (keyholes) | Not confirmed | Not confirmed |
| PRx Profile ONE, PRO and CORE | CORE: 3 x 3 in. ONE and Fold-In ONE: 2 x 3 in. PRO: 3 x 3 in. | 5/8 in (CORE) | 5/8 in pin on Profile PRO spotter arms; Profile ONE pin size not stated | CORE: 2 in on the front, 4 in on the side |
| Force USA MyRack | 60 mm, labeled 2.4 in square by Force USA | Accessory holes 5/8 in (16 mm), as Force USA prints it | Not confirmed | Westside (no numeric pitch given) |
| Powertec power racks and half racks | 2 3/8 x 2 3/8 in | Not confirmed | 1 in peg (Premium J-hooks) | Not confirmed |
| Sunny Health & Fitness Power Zone racks | Not confirmed | 3/4 in hardware peg hole (SF-XF9933) | Not confirmed | Not confirmed |
How the data is built
Every value comes from the rack maker's own product pages, manuals and support answers, read on 2026-10-09, and each carries its source on the rack's page. Where no maker states a field, it reads "Not confirmed". We do not measure racks ourselves, and we do not fill gaps from reseller listings.
Why the rack system decides fit, not the brand
Makers state fit per rack line. REP says it cannot guarantee compatibility between REP items and non-REP items because of manufacturing and machining differences,[1] and that its warranties can be voided when its products are used with other companies' products.[2] REP also says it does not guarantee its Drop-In Dip will fit other brands' racks.[3] So the finder is organized by rack system, and each page lists only the attachments whose makers name it.
Conflicts are shown, not resolved
Makers' own pages sometimes disagree. Titan's T-2 support answers say T-2 racks are 12-gauge steel, while Titan's rack comparison page lists the T-2 as 14-gauge.[4] When that happens, the rack's page shows both figures. Ask the maker before you rely on either.
Exclusions are specific to the host
Some racks exclude attachments other racks in the same family take. Rogue states that band pegs and Safety Spotter Arms should not be used with its RML-390F Flat Foot Monster Lite rack.[5] Each rack page has an "Attachments the maker excludes" field for this.
What is not listed yet
Fitness Reality, Griffin and the folding Force USA MyRack have no rack pages yet, because we found no primary maker facts for them. If yours is one of these, measure it with the measuring guide, start from the tube with the upright size finder, and see how to identify your rack.
Next
- How to measure your rack's uprights, holes and spacing
- Upright size finder: 2x2, 2x3, 3x3, 60 mm or 75 mm
- Before you buy: measure, read the rating, check the seller
- Rogue Infinity and R-Series (2x3)
- Rogue Monster Lite racks
- Rogue SML-2 Monster Lite squat stand
- Rogue RML-390F Flat Foot Monster Lite rack
- Rogue Monster racks
- REP PR-1000 and PR-1050
- REP PR-1100
- REP PR-4000
- REP PR-5000
- Titan T-2 Series
- Titan T-3 Series
- Titan X-3 Series
- Titan TITAN Series
- Bells of Steel 60 mm racks
- Bells of Steel Hydra
- Bells of Steel Manticore
- PRx Profile ONE, PRO and CORE
- Force USA MyRack
- Powertec power racks and half racks
- Sunny Health & Fitness Power Zone racks
Choose your rack system to see the key facts and what fits. Each fact links to its source on the full page.
All rack systems
- Rogue Infinity and R-Series (2x3)
- Rogue Monster Lite racks
- Rogue SML-2 Monster Lite squat stand
- Rogue RML-390F Flat Foot Monster Lite rack
- Rogue Monster racks
- REP PR-1000 and PR-1050
- REP PR-1100
- REP PR-4000
- REP PR-5000
- Titan T-2 Series
- Titan T-3 Series
- Titan X-3 Series
- Titan TITAN Series
- Bells of Steel 60 mm racks
- Bells of Steel Hydra
- Bells of Steel Manticore
- PRx Profile ONE, PRO and CORE
- Force USA MyRack
- Powertec power racks and half racks
- Sunny Health & Fitness Power Zone racks
Shop what this tool points toAll best picks
Questions
My rack is not in the list. What now?
Measure the upright size, hole diameter and hole spacing yourself, then buy only attachments whose maker states those exact numbers. The measuring guide shows how; the upright size finder lists makers' sizes for each tube.
Why does a field say 'Not confirmed'?
Because no maker page, manual or support answer we read states it. We leave it blank rather than guess or copy a figure from a reseller.
Why are two different numbers shown for one rack?
Because the maker publishes both. Titan's T-2 support answers say 12-gauge steel, while its rack comparison page says 14-gauge; we show the conflict instead of picking one.[4]