Shortlist · Landmine attachments
Rack landmines with a stated rating and a locking pin
Two approved rack landmines whose maker states a load rating, a pin lock and the uprights or rack lines they fit, plus the ones we left out and why.
We may earn a commission if you buy through links on this page. How we make money
Short answer
Two approved rack landmines state both a load rating and a pin lock. Choose Synergee's landmine if you want a version sold by upright size (2x2, 2x3 or 3x3) that also takes 1 in bars. Choose Titan's Rack-Mounted Landmine if you own a Titan T-2, T-3 or X-3 rack.
How we chose
A landmine is on this list only if:
- The maker states a load rating. Synergee rates its landmine to support up to 500 lb.[1] Several well-known rack landmines publish none: Rogue's Monster Landmine 2.0 page states no load rating,[2] and REP's Adroit page lists no rating, materials or hole sizes for the rack version.[3]
- It locks with a pin, not friction alone. Synergee's landmine locks into the upright with an included pin.[1] Rogue says the knurled knob on its Monster Landmine 2.0 has no locking feature and must be checked before each use.[2]
- The maker names the upright size or rack line. Synergee sells 2x2, 2x3 and 3x3 versions with a 5/8 in / 1 in hole converter.[1]
- It mounts to the rack and is in our approved catalog with a store listing. Yes4All states a 30-day return and a 1-year warranty for its landmine attachment,[4] but its plate-post insert does not mount to a rack upright, so it is not a rack pick.
Two landmines met this bar on 2026-10-09. We do not add others to fill the list.
Landmine sold by upright size, pinned to the upright
Synergee Landmine Attachment (2x2, 2x3 or 3x3; 5/8 in or 1 in converter)
Pick it if: Owners of 2x2, 2x3 or 3x3 racks with 5/8 in or 1 in holes, including those with 1 in bars
- Why it's here
- Synergee's landmine comes in 2x2, 2x3 and 3x3 versions with a 5/8 in / 1 in hole converter, locks into the upright with an included pin, and is rated to support up to 500 lb. Its sleeve takes 1 in standard and 2 in Olympic bar ends.
- Watch out
- The pivot covers 180 degrees in two directions, not a full 360. Synergee names upright and hole sizes, not rack models. The NC versions take 5/8 in holes only. On Amazon, check that 'Ships from / Sold by' shows Amazon.com or Synergee.
- Upright outer size
- 2 x 2 in · 2 x 3 in · 3 x 3 in
- Hole diameter
- 5/8 in, or 1 in with the included converter
- Hole spacing pattern
- Not stated
- Locking pin diameter and position
- Included mounting peg locks into the upright (5/8 in, 1 in with the converter) plus a side knob; peg position not stated
Values are the manufacturer's specs unless marked.
Landmine for Titan T-2, T-3 and X-3 racks
Titan Fitness Rack-Mounted Landmine for T‑2, T‑3 and X‑3 Series (SKU 401814)
Pick it if: Titan T-2, T-3 and X-3 owners
- Why it's here
- Titan lists its Rack-Mounted Landmine for T-2, T-3 and X-3 Series racks, with a 5/8 in pin mount and hex-key collar on T-3 and X-3, an adapter tube for T-2, a 50 mm sleeve and a 315 lb weight capacity.
- Watch out
- Titan says it does not fit TITAN Series racks. Titan states a 50 mm sleeve and does not list 1 in bars. Titan's warranty covers the original retail purchaser who bought directly from Titan. On Amazon, check that 'Ships from / Sold by' shows Amazon.com or Titan.
- Upright outer size
- Not stated
- Hole diameter
- Not stated
- Hole spacing pattern
- Not stated
- Locking pin diameter and position
- 5/8 in pin mount with hex-key collar on T-3 and X-3; 1.93 in adapter tube for T-2; single-bolt installation
Values are the manufacturer's specs unless marked.
Fit at a glance
| Landmine | Fits | Rating as stated | Lock | Bar ends |
|---|---|---|---|---|
| Synergee Landmine Attachment | 2x2, 2x3 or 3x3 uprights, 5/8 in or 1 in holes | Up to 500 lb | Included pin | 1 in and 2 in |
| Titan Rack-Mounted Landmine | Titan T-2, T-3, X-3 (not TITAN Series) | 315 lb weight capacity | 5/8 in pin mount with collar | 50 mm sleeve |
Synergee says its sleeve accepts both 1 in standard and 2 in Olympic bar ends[1] and that its pivot covers 180 degrees in two directions rather than a full 360.[1] Titan also sells a separate PPLDM landmine that mounts on 1 in diameter safety bars with a 2 in sleeve opening;[5] it is not in our catalog.
The landmine mounts guide and the landmine hub cover the rest of the topic.
Questions
Why is Rogue's Monster Landmine 2.0 not on this list?
Rogue's page states no load rating, and Rogue says the knurled knob that holds it has no locking feature and must be checked before each use. We list only landmines with a stated rating and lock.[2]
Why is REP's Adroit not on this list?
REP's Adroit page lists no load rating, materials or compatible hole sizes for the rack-mounted version.[3]