Tool · Measuring and buying
Find your drip kit or system
Find Rain Bird drip parts and other lines by kit: pick yours to see the tubing, fitting type, threads, pressure and filtration its maker documents.
We may earn a commission if you buy through links on this page. How we make money
Short answer
Pick the kit or brand line you own to open its page: the tubing size, fitting type, threads, pressure range and filtration its maker documents, plus the parts that maker lists for it. Buy add-on parts from that page, because lines that look alike often use different tubing sizes.
Picks this tool points toAll best picks
- Rain Bird XFD on-surface dripline
- Rain Bird Universal Easy-Fit fittings
- Rain Bird 1800-RETRO and Riser Connection Kit
- DIG Microline 1/4 in dripline and ML50 raised-bed kit
- DIG D54 filter/pressure regulator
- Raindrip Smart Loc coupling and RS2DC conversion
- Raindrip R560DP container and hanging-basket kit
- Orbit Universal (67466, 67468) and Drip-Lock (67491) fittings
- Mister Landscaper drip and micro-spray system
- Netafim Techline CV dripline
Choose your drip kit or system to see the key facts and what fits. Each fact links to its source on the full page.
All drip kits and systems
- Rain Bird XFD on-surface dripline
- Rain Bird Universal Easy-Fit fittings
- Rain Bird 1800-RETRO and Riser Connection Kit
- DIG Microline 1/4 in dripline and ML50 raised-bed kit
- DIG D54 filter/pressure regulator
- Raindrip Smart Loc coupling and RS2DC conversion
- Raindrip R560DP container and hanging-basket kit
- Orbit Universal (67466, 67468) and Drip-Lock (67491) fittings
- Mister Landscaper drip and micro-spray system
- Netafim Techline CV dripline
The lines at a glance
| Drip kit or system | Tubing | Fitting type | Pressure range | Filtration |
|---|---|---|---|---|
| Rain Bird XFD on-surface dripline | 0.536 in ID x 0.634 in OD, 0.049 in wall (13.6 x 16.1 mm, 1.2 mm wall) | Rain Bird XF Dripline insert fittings (17 mm barb-style, 0-50 psi) or Rain Bird Easy-Fit compression fittings (0.63-0.70 in OD, 0-60 psi) | 8.5-60 psi | 120 mesh |
| Rain Bird Universal Easy-Fit fittings | 0.63-0.70 in OD (Rain Bird also states 16-18 mm). Covers T63 (0.63 in) and T70 (0.70 in); T71 (0.71 in) is outside the stated range | Compression | 0-60 psi | Not confirmed |
| Rain Bird 1800-RETRO and Riser Connection Kit | CNV182EMT includes 50 ft of 1/4 in tubing and a manifold for 1/4 in tubing | 1800-RETRO includes a low-profile barb tee and elbow. Rain Bird's XF elbow and tee adapters (1/2 in FPT inlet) from the kit are now sold separately, for XF Series dripline | Regulated to 30 psi (1800-RETRO, Riser Connection Kit and CNV182EMT) | 1800-RETRO: accessible 200 mesh (75 micron) screen, replacement RBY-200SSMX. Riser Connection Kit: 200 mesh filter. CNV182EMT: includes a filter |
| DIG Microline 1/4 in dripline and ML50 raised-bed kit | Microline .170 in ID x .250 in OD. ML50 adds 50 ft of 1/2 in poly tubing at .600 x .700 in | Not confirmed | 10-25 psi | Minimum 150 mesh |
| DIG D54 filter/pressure regulator | Not confirmed | Threaded inline unit | Operating pressure up to 120 PSI | 150 mesh stainless steel screen |
| Raindrip Smart Loc coupling and RS2DC conversion | S5600UB: .520 x .620, .600 x .700 (labeled 5/8 in) and .620 x .710 in (ID x OD). RS2DC's adapter: 1/2 in, 5/8 in or 0.710 in supply tubing or dripline | Barb with a twist-on locking nut | S5600UB: up to 50 psi. RS2DC: no pressure rating on its page | RS2DC: 150 mesh screen |
| Raindrip R560DP container and hanging-basket kit | 75 ft of 1/4 in supply tubing | Barbed couplings, elbows and tees, an end plug, stakes and clamps | Not confirmed | Not confirmed |
| Orbit Universal (67466, 67468) and Drip-Lock (67491) fittings | 67466 and 67468: .620-.710 in OD. 67491: .690, .700 and .710 in OD | 67466 and 67468: insert with a hand-twisted outer nut; reusable, loosen the nut to remove the tubing. 67491: push-on with a release tab | Not confirmed | Not confirmed |
| Mister Landscaper drip and micro-spray system | MLT-71 (50 ft) and MLT-72 (100 ft) 1/2 in poly: .600 x .700 in. 1/4 in vinyl (MLT-B30, MLT-B100B, MLT-T100B, MLT-S20): .145 x .295 in | MLF reusable locking-collar fittings with built-in O-rings: MLF-33 faucet fitting, MLF-34 tee, MLF-35 elbow, MLF-36 coupling, MLF-ENDCAP | Drippers 5-25 psi | 150 mesh filter in its head order |
| Netafim Techline CV dripline | 0.56 in ID x 0.66 in OD, 0.050 in wall | Not confirmed | Compensates 14.5-58 psi; minimum 14 psi, maximum system pressure 58 psi | Minimum 120 mesh |
Why the line matters
Two 1/2 in class drip lines can differ in size. Rain Bird lists XFD dripline at 0.536 in ID x 0.634 in OD,[1] while Netafim lists Techline CV at 0.56 in ID x 0.66 in OD.[2] Neither is the same as blank 1/2 in tubing. A kit's own tubing can also differ from its add-ons: DIG's ML50 raised-bed kit includes 50 ft of 1/2 in poly tubing at .600 x .700 in[3] and 50 ft of 1/4 in drip line with emitters every 9 in, rated .52 GPH at 15 psi.[3]
Instructions are per system too. Mister Landscaper lists its faucet head order as backflow device, timer, pressure regulator, 150 mesh filter, then the poly faucet fitting.[4] That order is for its own system, not a rule for every kit.
How the data is built
Each line's page uses the maker's product pages, catalogs, manuals and FAQs, read on 2026-10-15. Where makers' pages disagree, the page shows both figures. Where no source states a field, it reads "Not confirmed". We do not test kits ourselves.
If your kit is not listed
Measure your tubing and threads, then start from the tubing size finder or the connection type finder. Imported kits with metric tubing are covered in joining metric tubing to US parts.
Next
- How to measure drip tubing
- Measure, then buy: sizes, sellers and import costs
- Drip line: flow, spacing and run length
- Rain Bird XFD on-surface dripline
- Rain Bird Universal Easy-Fit fittings
- Rain Bird 1800-RETRO and Riser Connection Kit
- DIG Microline 1/4 in dripline and ML50 raised-bed kit
- DIG D54 filter/pressure regulator
- Raindrip Smart Loc coupling and RS2DC conversion
- Raindrip R560DP container and hanging-basket kit
- Orbit Universal (67466, 67468) and Drip-Lock (67491) fittings
- Mister Landscaper drip and micro-spray system
- Netafim Techline CV dripline
Choose your drip kit or system to see the key facts and what fits. Each fact links to its source on the full page.
All drip kits and systems
- Rain Bird XFD on-surface dripline
- Rain Bird Universal Easy-Fit fittings
- Rain Bird 1800-RETRO and Riser Connection Kit
- DIG Microline 1/4 in dripline and ML50 raised-bed kit
- DIG D54 filter/pressure regulator
- Raindrip Smart Loc coupling and RS2DC conversion
- Raindrip R560DP container and hanging-basket kit
- Orbit Universal (67466, 67468) and Drip-Lock (67491) fittings
- Mister Landscaper drip and micro-spray system
- Netafim Techline CV dripline
Shop what this tool points toAll best picks
Questions
Is Rain Bird XFD the same size as Netafim Techline CV?
No. Rain Bird lists XFD at 0.536 x 0.634 in (ID x OD) and Netafim lists Techline CV at 0.56 x 0.66 in. Use the fittings each maker names.[1][2]
What size tubing comes in the DIG ML50 kit?
DIG lists 50 ft of 1/2 in poly tubing at .600 x .700 in and 50 ft of 1/4 in drip line with emitters every 9 in.[3]
My kit is not in the list. What now?
Measure the tubing's OD and ID and check each thread, then use the tubing size finder and the connection type finder.