Drip kit or system
Rain Bird Easy-Fit fittings: 0.63-0.70 in OD, 0-60 psi
Rain Bird lists Easy-Fit compression fittings for 0.63-0.70 in OD tubing at 0-60 psi. Its adapters are not barbs, and T71 is outside the range.
Also listed as Easy Fit, Easy-Fit compression fittings
We may earn a commission if you buy through links on this page. How we make money
Short answer
Easy-Fit is Rain Bird's 1/2 in compression line, listed for 0.63-0.70 in OD tubing (16-18 mm) at 0-60 psi. That covers T63 and T70 but not T71 at 0.71 in. Rain Bird says Easy-Fit adapters are not barbed fittings and go only into Easy-Fit compression fittings, and it names Easy-Fit for XFD dripline. See Rain Bird T63, T70, T71 and Easy-Fit.
Key facts
- What it is
- Rain Bird's 1/2 in Universal Easy-Fit compression fittings and threaded adapters[1]
- Tubing
- 0.63-0.70 in OD (Rain Bird also states 16-18 mm). Covers T63 (0.63 in) and T70 (0.70 in); T71 (0.71 in) is outside the stated range[1][2]
- Fitting type
- Compression[1]
- Threads
- Male- and female-threaded Easy-Fit adapters exist; they go only into Easy-Fit compression fittings[1]The page read gives no thread size for the adapters.
- Emitters or outlets
- Not confirmedEasy-Fit is a fitting line; it carries no emitters.
- Pressure range
- 0-60 psi[1]
- Filtration
- Not confirmedRain Bird's Easy-Fit page states no filtration.
- Pressure regulation
- Not confirmedRain Bird's Easy-Fit page names no regulator.
- Maker cautions
- Rain Bird says Easy-Fit adapters are not barbed fittings and are to be used only with Easy-Fit compression fittings[1]
- Parts the maker lists for it
- Rain Bird names Easy-Fit compression fittings, alongside XF insert fittings, for XFD dripline (0.634 in OD)[3]
- Maker-page conflicts
- Not confirmedNo conflict recorded on the Easy-Fit page read.
- Not confirmed
- Not confirmedNo thread size for the adapters and no material beyond general wording were confirmed. No source reports Easy-Fit on tubing outside 0.63-0.70 in OD.
Watch out for
- T71 (0.71 in OD) is outside Easy-Fit's stated 0.63-0.70 in range.
- Easy-Fit adapters are not barbs: Rain Bird says they go only into Easy-Fit compression bodies.
- Rain Bird calls the line 'Universal', but the page gives a 0.63-0.70 in OD range. The range is the fit, not the name.
- A .620 in OD tube is just below the stated 0.63 in lower bound.
What fits
Product details below are the seller's own description unless a source is shown. Pick the variant named for each item.
Easy-Fit coupling
Rain Bird Easy-Fit EFC25‑1PS 1/2 in universal compression coupling (0.63‑0.70 in OD)Choose the EFC25-1PS coupling.
0.63-0.70 in OD, 0-60 psi.
Easy-Fit tee
Rain Bird Easy-Fit EFT25‑1PS 1/2 in universal compression tee (0.63‑0.70 in OD)Choose the EFT25-1PS tee.
0.63-0.70 in OD, 0-60 psi.
0.63 in OD tubing
Rain Bird T63‑100 1/2 in blank distribution tubing (0.63 in OD, 100 ft)Choose the T63-100 100 ft coil.
Rain Bird lists T63 at 0.63 in OD, the bottom of the Easy-Fit range.
0.70 in OD tubing
Rain Bird T70‑100S 1/2 in heavy-duty blank distribution tubing (0.70 in OD, 100 ft)Choose the T70-100S 100 ft coil.
Rain Bird lists T70 at 0.70 in OD, the top of the Easy-Fit range.
Questions
Does Easy-Fit fit .710 tubing?
Rain Bird lists Easy-Fit for 0.63-0.70 in OD, so it does not list .710 in tubing such as T71 (0.71 in OD).[1][2]
Can I use an Easy-Fit adapter in a barbed fitting?
No. Rain Bird says Easy-Fit adapters are not barbed fittings and are to be used only with Easy-Fit compression fittings.[1]
What pressure is Easy-Fit rated for?
Rain Bird lists 0-60 psi for Universal Easy-Fit fittings.[1]