Cable setup

Titan T-3 and X-3 lat tower: rack fit, exclusions and contents

Which Titan racks the T-3/X-3 lat tower fits, the Flat Foot and pre-October 2021 exclusions, its 300 lb plate capacity and what comes in the box.

Also listed as Titan T-3 lat tower, Titan X-3 lat tower, Titan lat tower rack attachment

We may earn a commission if you buy through links on this page. How we make money

Short answer

Titan sells this lat tower for T-3 and X-3 bolt-down power racks only, in Short and Tall versions. It does not fit Flat Foot racks or T-3/X-3 racks bought before October 2021. Titan lists a 300 lb weight plate capacity and a one-year warranty.

Key facts

Setup type
Rack-mounted, plate-loaded lat tower[1]
Racks or supports the maker lists
T-3 and X-3 bolt-down power racks (Short and Tall versions)[1]
Maker exclusions
Flat Foot racks; T-3 and X-3 racks bought before October 2021[1]
Mount and hardware
Mounts between the uprights of the listed racks[1]
Resistance and loading
Plate-loaded, with dual plate sleeves[1]
Pull ratio
Not stated by Titan[1]
Maker's load rating
300 lb weight plate capacity[1]
Cable length and diameter
Not stated by Titan[1]
Cable travel
Not confirmed
What is included
Lat bar, low row handle, stabilizer bars, carabiners, nylon pulley system, dual plate sleeves and footplates[1]
Connector at the cable end
Carabiners (included)[1]
Small increments
Not confirmed
Installation the maker requires
Not confirmed
Maker warranty
One year[1]
Replacement parts
Not confirmed
Not confirmed
Cable length and pull ratio are not stated[1]

Watch out for

  • Flat Foot versions of the T-3 and X-3 are excluded.
  • A T-3 or X-3 bought before October 2021 is excluded, so check your purchase date first.
  • Titan sells a separate lat tower for its T-2 series racks; this one is not the T-2 version.

What fits

Product details below are the seller's own description unless a source is shown. Pick the variant named for each item.

Questions

Will the Titan lat tower fit my older T-3 rack?

Not if it was bought before October 2021. Titan excludes T-3 and X-3 racks bought before then, and Flat Foot racks.[1]

Is there a lat tower for the Titan T-2 rack?

Titan sells a separate lat tower attachment for its T-2 series power racks. Its specs and exclusions are not confirmed here, so check Titan's page.[2]

What load rating does Titan give the T-3/X-3 lat tower?

Titan lists a 300 lb weight plate capacity for this attachment, with a one-year warranty.[1]

Sources

  1. Lat Tower Rack Attachment – Fits T-3 & X-3 Series Bolt-Down Power Racks · Titan Fitness · Variants, exclusions, contents, capacity, warranty for the T-3/X-3 lat tower. · checked 10 Oct 2026
  2. T-2 Series Power Racks · Titan Fitness · Collection listing showing a T-2 series lat tower attachment. · checked 10 Oct 2026

Next review due 9 Jan 2027.