Tool · Tool-port adapters
Dust port finder by tool model
Pick a sander, router kit or track saw to see its dust port label as the maker states it, whether ID or OD is given, the maker's own route and the adapters it names.
We may earn a commission if you buy through links on this page. How we make money
Short answer
Pick your sander, router kit or track saw to see its dust port label as the maker states it, whether that label is an inside or outside diameter, the maker's own vacuum route and the adapters it names. Start from that route; measure only when the maker names nothing for your hose.
- DEWALT DWE6423 random orbit sander
- DEWALT DCW210B 20V MAX XR cordless random orbital sander
- Bosch ROS20VSC random orbit sander
- Bosch RA1172AT router dust extraction kit
- Makita SP6000J 6-1/2 in plunge circular saw
- Makita XPS01PTJ cordless plunge circular saw
Choose your tool to see the key facts and what fits. Each fact links to its source on the full page.
What the table shows
| Tool | Tool type | Dust port size (maker's label) | Inside or outside diameter | Maker's own extractor connection | Adapters the maker names |
|---|---|---|---|---|---|
| DEWALT DWE6423 random orbit sander | Random orbit sander (DEWALT product page) | Not confirmed | Not confirmed | DEWALT: fits the DWV010 and DWV012 dust extractors directly | DWV9000 (DEWALT) |
| DEWALT DCW210B 20V MAX XR cordless random orbital sander | Cordless random orbital sander, sold as tool only (DEWALT) | Not confirmed | Not confirmed | DEWALT: fits directly onto the DWV010 and DWV012 dust extractors | DWV9000 (DEWALT) |
| Bosch ROS20VSC random orbit sander | Random orbit sander (Bosch product page) | Not confirmed | Not confirmed | Not confirmed | VAC002 (in the box) and VAC024 (Bosch) |
| Bosch RA1172AT router dust extraction kit | Two-hood router dust extraction kit for Bosch 1617, 1617EVS, 1618 and 1618EVS routers on fixed bases RA1161, RA1162, RA1164 and RA1165 (Bosch list) | Not confirmed | Not confirmed | Not confirmed | VAC002 (included), VAC024 and VAC020 (Bosch) |
| Makita SP6000J 6-1/2 in plunge circular saw | 6-1/2 in plunge circular saw (Makita) | Makita gives two labels on one page: '1-7/16-inch rear dust port' and '1-1/2" OD dust port' | Not confirmed | Not confirmed | Not confirmed |
| Makita XPS01PTJ cordless plunge circular saw | Cordless plunge circular saw (Makita) | Makita: 'large 1-7/16-inch rear dust port' | Not confirmed | Not confirmed | Not confirmed |
Each value comes from the tool maker's own product or support page, and each tool's page shows the source. A few examples of what those pages settle:
- DEWALT DWE6423. DEWALT says the sander's port fits its DWV010 and DWV012 extractors directly, and that for other vacuum systems with 1-1/4-inch hoses you use the DWV9000 connector.[1] DEWALT's support article names the same route for several related sander models.[2] It does not say every other brand's cuff fits.
- Bosch ROS20VSC. Bosch lists a VAC002 adapter in the box and names VAC002 or VAC024 for 1-1/4- or 1-1/2-inch vacuum hose.[3]
- Makita SP6000J. Makita's page describes a 1-7/16-inch rear dust port in one bullet[4] and a 1-1/2-inch OD port in another. We list both labels as Makita's and treat the actual size as unresolved. The cordless XPS01PTJ page also says 1-7/16 inch and does not say whether that is an ID or an OD.[5]
"Not confirmed"
A field marked "Not confirmed" means no source we verified states that value. Port drawings and tolerances are rare on maker pages, so many fields read that way. We do not fill gaps with seller listings or forum posts, and we do not measure tools ourselves.
Your tool is not listed
- Check the tool maker's page for a named adapter or hose.
- Measure both the inside and outside diameter of the port, as Rockler advises, because the port's outside diameter has to match the hose's inside diameter.[6] See how to measure a dust port.
- Match the result in the dust hose size finder.
Next
- Tool-port adapters: every page
- Sander dust port to shop-vac hose
- Track saw dust port adapters
- Router dust hood hose adapters
- DEWALT DWE6423 random orbit sander
- DEWALT DCW210B 20V MAX XR cordless random orbital sander
- Bosch ROS20VSC random orbit sander
- Bosch RA1172AT router dust extraction kit
- Makita SP6000J 6-1/2 in plunge circular saw
- Makita XPS01PTJ cordless plunge circular saw
Choose your tool to see the key facts and what fits. Each fact links to its source on the full page.
Questions
My tool is not in the finder. What now?
Look the tool up on its maker's page for a named adapter, then measure the port's inside and outside diameter, as Rockler advises. The measuring guide shows how.[6]
Why does the Makita SP6000J show two sizes?
Makita's own page gives two: a 1-7/16-inch rear dust port in one place and a 1-1/2-inch OD port in another. We show both as Makita's labels and treat the real size as unresolved.[4]
What does "Not confirmed" mean?
No source we verified states that value. It does not mean the value is wrong or missing from the tool, only that we could not confirm it from the maker or another named source.