CNC machine
Genmitsu PROVerXL 6050 Plus: 52 and 65 mm mounts explained
Genmitsu's PROVerXL 6050 Plus: the 300 W stock spindle, the extra 65 mm holder, the 14.5 mm bit-center shift from 52 to 65 mm, and toe clamps.
Also listed as 6050 Plus, PROVerXL 6050
We may earn a commission if you buy through links on this page. How we make money
Short answer
Genmitsu lists the PROVerXL 6050 Plus stock spindle at 300 W, 12,000 RPM on 0-48 V DC, and includes an extra 65 mm spindle holder. SainSmart's setup article identifies the standard mount as 52 mm and says the 65 mm mount moves the bit center 14.5 mm forward over the bed.
What fits
- 69 mm mountGenmitsu 69 mm aluminum spindle mount (101‑63‑6050ZC69) for the PROVerXL 6050 PlusCheck price on Amazon
- Dust shoe, 65-69 mmGenmitsu DS69 dust shoe for 65‑69 mm spindles and compact routersCheck price on Amazon
- Toe clampsGenmitsu Upgrade CNC Router Vise Clamp, low-profile aluminum toe clamp (101‑63‑VC), 2 or 4 piecesCheck price on Amazon
Key facts
- Maker and model
- Genmitsu (SainSmart) PROVerXL 6050 Plus[1]
- Z axis or slider
- 52 mm mount with three positions (standard, 10 mm higher, 20 mm lower); the 65 mm mount uses six bolts and one position[2]From SainSmart's setup article.
- Router or spindle it ships with
- 300 W, 12,000 RPM spindle on 0-48 V DC[1]The product page gives no spindle diameter.
- Mount it ships with
- 52 mm standard mount, per SainSmart's setup article, plus an extra 65 mm spindle holder[2][1]
- Other mounts the maker lists
- The included 65 mm holder moves the bit center 14.5 mm forward over the bed compared with the 52 mm mount[2]SainSmart also notes the 52 mm dust shoe slightly limits the highest motor position.
- Mounts and kits the maker excludes
- Not confirmed
- Spindle kits that name it
- Not confirmedGenmitsu says the 6050 Plus uses the laser cables supplied with the machine for its V2 water kit, rather than listing it as a signal-cable match.
- Supply the maker's kits require
- Not confirmed
- Collets supplied
- Not confirmed
- Table and workholding thread
- Genmitsu lists its low-profile toe clamp (M6 screws and nuts) for Genmitsu 4030 and larger machines with T-track, hybrid tables or M6 spoilboards[3]Fit still depends on your board's thread.
- Dust boots that name it
- Not confirmed
- Maker support for third-party parts
- Not confirmed
- Revisions and conflicts
- The product page gives no spindle diameter; the 52 mm standard mount comes from SainSmart's setup article.[1][2]
- Not confirmed
- Not confirmed
Watch out for
- Moving from the 52 mm to the 65 mm mount shifts the bit center 14.5 mm forward over the bed, per SainSmart, so recheck your work zero and clamp layout.
- The 65 mm mount has one position; the 52 mm mount has three.
- The 52 mm dust shoe slightly limits the highest motor position, per SainSmart's article.
What fits
Product details below are the seller's own description unless a source is shown. Pick the variant named for each item.
69 mm mount
Genmitsu 69 mm aluminum spindle mount (101‑63‑6050ZC69) for the PROVerXL 6050 PlusChoose the 69 mm mount (101-63-6050ZC69) for a DeWalt DWP611-class router.
Genmitsu sells this 6050 mount for the PROVerXL 6050 Plus; the machine already includes a 65 mm holder.
Dust shoe, 65-69 mm
Genmitsu DS69 dust shoe for 65‑69 mm spindles and compact routersChoose the DS69 if you run a 65 or 69 mm router or spindle.
Genmitsu names the PROVerXL series for the DS69 and says it does not fit 52 mm spindles.
Toe clamps
Genmitsu Upgrade CNC Router Vise Clamp, low-profile aluminum toe clamp (101‑63‑VC), 2 or 4 piecesChoose the 4-piece set (101-63-VC-4P) for M6 holes or T-track.
Genmitsu lists the toe clamp for its 4030 and larger machines.
This is a reference for owners, not a machine recommendation. See 52 mm mounts and 65 mm mounts.
Questions
What changes when I move the 6050 Plus from the 52 mm to the 65 mm mount?
SainSmart's setup article says the 65 mm mount moves the bit center 14.5 mm forward over the bed compared with the 52 mm mount, and uses six bolts in one position.[2]
What spindle comes with the PROVerXL 6050 Plus?
Genmitsu lists a 300 W, 12,000 RPM spindle on 0-48 V DC and an extra 65 mm spindle holder. The product page gives no spindle diameter.[1]