Cable setup
Surplus Strength UPS Low: crossmember fit, cable and warranty
The lower crossmember sizes, height and hole sizes Surplus Strength lists for the UPS Low, its cut-to-length cable, the contents and the missing capacity.
Also listed as UPS Low, UPS-Low
We may earn a commission if you buy through links on this page. How we make money
Short answer
Surplus Strength sells the UPS Low as an add-on to its UPS High. It fits 3x3 or 2x3 lower crossmembers with a top height of at least 6.75 in, on racks with 1 in or 5/8 in holes, and can go on the side, rear or front. Surplus cuts the 1/4 in cable to the rack height you give in the order notes and states no weight capacity.
Key facts
- Setup type
- Low-pulley add-on to the UPS High[1]
- Racks or supports the maker lists
- 3x3 or 2x3 lower crossmembers with a top height of at least 6.75 in, on racks with 1 in or 5/8 in holes[1]Side, rear or front of the rack, per Surplus.
- Maker exclusions
- Not confirmed
- Mount and hardware
- On a lower crossmember; 1 in or 5/8 in rack holes[1]
- Resistance and loading
- Not confirmed
- Pull ratio
- Not confirmed
- Maker's load rating
- Not stated by Surplus Strength[1]
- Cable length and diameter
- 1/4 in cable, cut to the rack height you give in the order notes[1]
- Cable travel
- Not confirmed
- What is included
- Cable, carabiner and pulley[1]The page conflicts on pulley material, so it is left out here.
- Connector at the cable end
- Carabiner[1]
- Small increments
- Not confirmed
- Installation the maker requires
- Not confirmed
- Maker warranty
- Lifetime on structural welds; five years on the pulley[1]
- Replacement parts
- Not confirmed
- Not confirmed
- No weight capacity is stated, and the page is inconsistent on pulley material[1]
Watch out for
- It is an add-on to the UPS High, not a complete station.
- The lower crossmember must have a top height of at least 6.75 in.
- "Universal" in a product family name is not a universal fit. Surplus lists the crossmember sizes, height and hole sizes above.
- Give your rack height in the order notes; Surplus cuts the cable to length.
What fits
Product details below are the seller's own description unless a source is shown. Pick the variant named for each item.
Ankle straps
DMoose Ankle Straps for Cable MachinesChoose Black, Pair.
DMoose lists two stainless steel D-rings and a hook-and-loop closure.
Row handle
Synergee D Handle Cable Attachment - Double D HandleChoose the plain Double D Handle (option c), not the version with grip.
Synergee's 800 lb figure is for the handle; Surplus states no capacity for the UPS Low.
Triceps rope
Titan Fitness Tricep Rope Pulldown AttachmentChoose the Tricep Rope (Titan SKU 400130).
Titan says its swivel connects to a 9/16 in hook or carabiner.
Questions
Does the UPS Low work without the UPS High?
Surplus Strength describes the UPS Low as an add-on to its UPS High. Treat it as an accessory to that unit, not a complete station.[1]
Which racks does the UPS Low fit?
Surplus lists 3x3 or 2x3 lower crossmembers with a top height of at least 6.75 in, on racks with 1 in or 5/8 in holes. It can go on the side, rear or front.[1]
What is the UPS Low's weight capacity?
Surplus Strength does not state one. Do not borrow a figure from another pulley; ask Surplus.[1]