CNC machine
Onefinity Gen 2 Elite Z-20: 80 mm mount and Suckit SM fit
Onefinity's 80 mm mount for Gen 2 Elite Z-20 machines, what it excludes, the 80 mm-only Suckit SM boot and its port size, and the Redline kits.
Also listed as Woodworker Gen 2, Journeyman Gen 2, Foreman Gen 2, Onefinity Elite Gen 2
Short answer
Onefinity's 80 mm mount SKU z2080mmmountGen2 fits Gen 2 Elite Woodworker, Journeyman and Foreman machines with the Z-20 slider, and excludes Original, X-35, X-50, Gen 1 Elite and wall-mounted machines. The Suckit SM (Gen 2) boot fits 80 mm spindles only, not 65 mm spindles or the Makita router.
Key facts
- Maker and model
- Onefinity Gen 2 Elite Woodworker, Journeyman and Foreman[1]
- Z axis or slider
- Z-20 slider (Gen 2)[1]
- Router or spindle it ships with
- Not confirmed
- Mount it ships with
- Not confirmed
- Other mounts the maker lists
- Onefinity 80 mm spindle mount, SKU z2080mmmountGen2, with a Z homing sensor trigger plate and preinstalled bearings[1]
- Mounts and kits the maker excludes
- z2080mmmountGen2 excludes Original, X-35, X-50, Gen 1 Elite and wall-mounted machines. The 65 mm Redline kit is not compatible with Onefinity's ATC.[1][2]
- Spindle kits that name it
- Onefinity Redline 80 mm kits: 1.5 kW (ER20, 110 V, air-cooled) and 2.2 kW (ER20, 220 V single-phase, air-cooled)[3][4]Onefinity's own kits; their pages do not state a per-generation machine list.
- Supply the maker's kits require
- Onefinity: the Redline VFD requires a 15 A breaker, and GFCI installation may cause frequent false tripping. The 2.2 kW kit is 220 V single-phase with a NEMA 6-15P plug; the 1.5 kW kit is 110 V.[4][3]Quoted from the maker. The kit manual and a qualified electrician decide the circuit; never remove or bypass GFCI protection.
- Collets supplied
- Redline 80 mm kits: ER20 nut with 1/2, 3/8, 1/4 and 1/8 in collets[3][4]These come with the spindle kits, not with the machine.
- Table and workholding thread
- Not confirmed
- Dust boots that name it
- Onefinity Suckit SM (Gen 2): 80 mm spindles only; port 67.60 mm (2.66 in) outside and 57.93 mm (2.28 in) inside diameter; 30 mm and 50 mm magnetic brush rings[5]Onefinity also calls it a 2.5 in port, which matches neither listed figure exactly; treat 2.5 in as a nominal label. The SM slides over the spindle and moves with the Z axis.
- Maker support for third-party parts
- Onefinity says it no longer offers parts or support for other machines.[6]
- Revisions and conflicts
- Onefinity distinguishes the spindle-mounted Suckit SM, which moves with the Z axis, from the original Suck It and Suck It Pro, which a maker reply says work with both 65 mm and 80 mm boots.[7]
- Not confirmed
- Not confirmed
Watch out for
- The Gen 2 80 mm mount does not fit Original, X-35, X-50, Gen 1 Elite or wall-mounted machines.
- The Suckit SM fits 80 mm spindles only; Onefinity says it will not work with 65 mm spindles or the Makita router.
- The Suckit SM port is listed as 57.93 mm inside and 67.60 mm outside diameter, so check your hose against those figures, not the 2.5 in label.
This is a reference for owners, not a machine recommendation. Fit is stated only for the Gen 2 machines Onefinity names. See 80 mm mounts for other makers.
Questions
Which 80 mm mount fits a Onefinity Gen 2 Elite?
Onefinity lists SKU z2080mmmountGen2 for Gen 2 Elite Woodworker, Journeyman and Foreman machines with the Z-20 slider. It excludes Original, X-35, X-50, Gen 1 Elite and wall-mounted machines.[1]
Will the Suckit SM fit a Makita router?
No. Onefinity says the Suckit SM fits 80 mm spindles only and will not work with 65 mm spindles or the Makita router.[5]
What hose fits the Suckit SM port?
Onefinity lists the port at 67.60 mm (2.66 in) outside diameter and 57.93 mm (2.28 in) inside diameter. It also calls it a 2.5 in port, which is a nominal label.[5]