CNC machine
Onefinity Z-16 original slider: 80 mm mount and dust boot fit
Onefinity's 80 mm mount for the Z-16 original slider, the machines it lists and excludes, and the Suck It dust boots Onefinity sells for its own CNC.
Also listed as X-35, X-50 original Z, Onefinity Original, Z-16
Short answer
Onefinity's 80 mm spindle mount SKU 1z1680mmspindlemount fits the Z-16 original Z-slider on the Original, X-35 and X-50 machines it lists, and is not compatible with Elite series or wall-mounted machines. Onefinity says its Suck It dust boot works only with the Onefinity CNC.
Key facts
- Maker and model
- Onefinity Original Woodworker and Machinist, X-35 Woodworker and Machinist, X-50 Woodworker and Journeyman[1]The machines Onefinity lists for its Z-16 80 mm mount.
- Z axis or slider
- Z-16 original Z-slider[1]
- Router or spindle it ships with
- Not confirmed
- Mount it ships with
- Not confirmed
- Other mounts the maker lists
- Onefinity 80 mm spindle mount, SKU 1z1680mmspindlemount, with bearings preinstalled[1]
- Mounts and kits the maker excludes
- The Z-16 80 mm mount is not compatible with Elite series or wall-mounted machines. The Gen 2 Z-20 80 mm mount (z2080mmmountGen2) excludes Original, X-35 and X-50 machines.[1][2]
- Spindle kits that name it
- Not confirmed
- Supply the maker's kits require
- Not confirmed
- Collets supplied
- Not confirmed
- Table and workholding thread
- Not confirmed
- Dust boots that name it
- Onefinity Suck It (Gen 1) regular and Pro, which share one shoe with a built-in 2.5 in hose adapter[3][4]Onefinity says the Suck It works only with the Onefinity CNC. A maker reply says the original Suck It and Suck It Pro work with both 65 mm and 80 mm boots.
- Maker support for third-party parts
- Onefinity says it no longer offers parts or support for other machines.[3]From Onefinity's Suck It FAQ.
- Revisions and conflicts
- Onefinity sells separate 80 mm mounts for the Z-16 original slider and for the Gen 2 Z-20; each excludes the other's machines.[1][2]
- Not confirmed
- Not confirmed
Watch out for
- The Z-16 80 mm mount (1z1680mmspindlemount) is not for Elite series or wall-mounted machines.
- The Gen 2 Z-20 80 mm mount (z2080mmmountGen2) does not fit Original, X-35 or X-50 machines, so match the SKU to your slider.
- Onefinity says its Suck It boot works only with the Onefinity CNC.
This is a reference for owners, not a machine recommendation. If your machine has a Z-20 slider, see Onefinity Z-20 Gen 1 or Gen 2 Elite.
Questions
Which Onefinity 80 mm mount fits the original Z-16 slider?
Onefinity lists SKU 1z1680mmspindlemount for the Z-16 original Z-slider on the Original, X-35 and X-50 machines. It is not compatible with Elite series or wall-mounted machines.[1]