CNC machine
Genmitsu PROVerXL 4030 V2: spindle holders and upgrades
Genmitsu's PROVerXL 4030 V2: the extra 65 mm holder, the 69 and 65 mm 4030 V2 holders, the 300 W spindle-only SKU, toe clamps and the V2 water kit.
Also listed as 4030 V2, PROVerXL 4030
We may earn a commission if you buy through links on this page. How we make money
Short answer
Genmitsu ships the PROVerXL 4030 V2 with an extra 65 mm spindle holder and sells 4030 V2 holders in 69 mm and 65 mm, also listed for the PROVerXL 4x4 Z axis. Its 300 W 52 mm spindle is sold as a spindle-only SKU for the 4030 and 4030 V2. Genmitsu lists the 4030 V2 as a signal-cable match for its V2 water-cooled kit.
What fits
- Dust shoe, 52 mmGenmitsu DS52 dust shoe for 52 mm spindlesCheck price on Amazon
- Dust shoe, 65-69 mmGenmitsu DS69 dust shoe for 65‑69 mm spindles and compact routersCheck price on Amazon
- Toe clampsGenmitsu Upgrade CNC Router Vise Clamp, low-profile aluminum toe clamp (101‑63‑VC), 2 or 4 piecesCheck price on Amazon
Key facts
- Maker and model
- Genmitsu (SainSmart) PROVerXL 4030 V2[1]
- Z axis or slider
- Not confirmed
- Router or spindle it ships with
- Stock spindle listed at max 400 W, 10,000 RPM, 0-48 V DC[1]From Genmitsu's spec table.
- Mount it ships with
- Ships with an extra 65 mm spindle holder[1]The product page does not name the stock holder size.
- Other mounts the maker lists
- Genmitsu 4030 V2 spindle holder in 69 mm (101-63-4030V2-ZC69) and 65 mm (101-63-PXL43V2-SMM65), also listed for the PROVerXL 4x4 Z axis[2]The 69 mm version measures 110 x 90 x 35 mm outside.
- Mounts and kits the maker excludes
- Not confirmed
- Spindle kits that name it
- Genmitsu 300 W spindle (52 mm, ER11), spindle-only SKU 101-63-XL43-SPM300 for the PROVerXL 4030 and 4030 V2; Genmitsu V2 water-cooled kit (signal-cable match)[3][4]The V2 water-kit list is a signal-interface list, not a mount or payload approval.
- Supply the maker's kits require
- Genmitsu's 300 W spindle runs on 12-48 V DC; its V2 water-cooled kit page states a 110 V/60 Hz input[3][4]Quoted from the maker; follow the kit manual. The V2 page states no per-region voltage or current.
- Collets supplied
- Not confirmedGenmitsu's separate 300 W spindle uses an ER11 collet.
- Table and workholding thread
- Genmitsu lists its low-profile toe clamp (M6 screws and nuts) for Genmitsu 4030 and larger machines with T-track, hybrid tables or M6 spoilboards[5]Fit still depends on your board's thread.
- Dust boots that name it
- Not confirmedGenmitsu matches its DS52 and DS69 shoes by spindle diameter; see the mount-size records.
- Maker support for third-party parts
- Not confirmed
- Revisions and conflicts
- Genmitsu lists both the PROVerXL 4030 V1 and 4030 V2 as V2 water-kit signal-cable matches, and sells separate 4030 V2 holders.[4][2]
- Not confirmed
- Not confirmed
Watch out for
- The 4030 V2 has its own holders (101-63-4030V2-ZC69 and 101-63-PXL43V2-SMM65); they are not the 4040-PRO's ZC65/ZC69.
- Genmitsu lists the 4030 V2 for the V2 water kit's signal cable only, not as a mount or payload approval.
- Genmitsu's product page does not name the stock holder size, so measure before buying a dust shoe.
What fits
Product details below are the seller's own description unless a source is shown. Pick the variant named for each item.
Dust shoe, 52 mm
Genmitsu DS52 dust shoe for 52 mm spindlesChoose the DS52 if you run a 52 mm spindle.
Genmitsu names the PROVerXL 4030 for the DS52 and matches it to 52 mm spindles; the listing gives 52 mm as 1.65 in in one place, which is a listing error.
Dust shoe, 65-69 mm
Genmitsu DS69 dust shoe for 65‑69 mm spindles and compact routersChoose the DS69 if you run a 65 or 69 mm router or spindle.
Genmitsu names the PROVerXL series for the DS69 and says it does not fit 52 mm spindles.
Toe clamps
Genmitsu Upgrade CNC Router Vise Clamp, low-profile aluminum toe clamp (101‑63‑VC), 2 or 4 piecesChoose the 4-piece set (101-63-VC-4P) for M6 holes or T-track.
Genmitsu lists the toe clamp for its 4030 and larger machines.
This is a reference for owners, not a machine recommendation. See 52 mm mounts and 65 mm mounts.
Questions
Does the PROVerXL 4030 V2 come with a 65 mm holder?
Yes. Genmitsu says the PROVerXL 4030 V2 ships with an extra 65 mm spindle holder.[1]
Is there a 69 mm holder for the 4030 V2?
Genmitsu sells a 4030 V2 spindle holder in 69 mm (101-63-4030V2-ZC69) and 65 mm (101-63-PXL43V2-SMM65), also listed as compatible with the PROVerXL 4x4 Z axis.[2]