Guide · Safeties
Rack attachment recalls and pre-use inspection
The REP strap bracket and Rogue J-cup recalls, how to search SaferProducts.gov and Health Canada, and the inspection steps makers prescribe before lifting.
We may earn a commission if you buy through links on this page. How we make money
Picks in this topic
- Synergee Safety Straps, pair (2x2, 2x3 or 3x3; 23, 29 or 35 in inside depth)Check price on Amazon
- Titan Fitness T‑3 Series Safety Strap Spotter Arms, pair (SKU 402037)Check price on Amazon
- Titan Fitness X‑3 Series Spotter Arms, pair (SKU 401092)Check price on Amazon
Short answer
We found two documented CPSC recalls of rack attachments: REP strap safety brackets in 2021 and Rogue J-cups in 2011. Both are historical, so check the notice against your exact part. Beyond recalls, follow the maker's own inspection rule; Rogue's strap manuals say to inspect all rigging before each use.
Picks in this topicSee the shortlist
The two recalls we found
REP strap safety brackets, 2021. CPSC recall 21-721, dated February 11, 2021, covered about 1,940 REP Fitness PR-4000 and PR-5000 strap safety brackets. Poorly welded brackets could detach when weight dropped onto the straps.[1] The SKUs were PRA-4120 and PRA-5122, sold only on repfitness.com from April to December 2020. The CPSC reported three reports of brackets breaking and no injuries; the remedy was free replacement brackets.[1]
Rogue barbell brackets (J-cups), 2011. In April 2011 (release 11-193, April 12, 2011) the CPSC announced a recall of about 5,500 Rogue Fitness barbell brackets because the weld between the bracket and its pin could break and let weights fall.[2] They were used with the SPX Squat Press Stand, the R-3 and R-4 racks and Infinity Rigs, and sold on Rogue's website from March 2009 to December 2010. There were three weld-break reports, including one sprained wrist; the remedy was a free replacement.[2]
Neither recall says anything about current REP or Rogue products or other revisions. They matter if you own, or are buying used, parts from those dates.
How to look up a recall or a report
- Find the part's identity. Note the brand, product name, SKU and roughly when it was bought. A used part with no paperwork is harder to clear.
- Search the CPSC. SaferProducts.gov lets the public search product incident reports by brand, model, product and date, and file their own. The CPSC states that it does not guarantee the accuracy of report contents.[3] A report is one person's account, and finding no report is not evidence that a part is safe.
- In Canada, check Health Canada. Health Canada says the Canada Consumer Product Safety Act prohibits the manufacture, import, advertising or sale of consumer products that are a danger to human health or safety. Manufacturers, distributors and importers must report incidents, and Health Canada can order recalls.[4]
- Ask the maker. The maker knows which revisions it has changed and can confirm whether yours is covered.
You may also see "General Certificate of Conformity" in seller listings. The CPSC says a manufacturer or importer must issue one for general-use products subject to consumer product safety rules.[5] The CPSC page does not say that a given rack attachment is subject to a specific rule, so a missing certificate is not proof of a problem, and a certificate is not a fit or load approval.
What the makers tell you to inspect
The makers' own instructions are the inspection checklist we can stand behind:
- Rogue Monster straps. The manual says to make sure each hanger's pin notch is fully seated on the upright wall and that all rigging must be inspected before each use.[6]
- Rogue Monster Lite straps. Rogue's Monster Lite strap manual also says all rigging must be inspected before each use.[7]
- Oak Club MagPins. Oak Club says its magnetic pins are for experienced lifters only, tells users to check installation before each lift, and says to always use a failsafe method of attachment securement.[8]
A practical pre-use pass, built from those instructions: every pin the maker specifies is fully in, hangers and cups sit flat against the upright, bolts are present, straps and liners are not cut or worn through, and welds show no cracks. None of this replaces the maker's manual.
When to stop and contact the maker
- A weld looks cracked, or a bracket or pin is bent.
- A pin will not go fully home, or a second pin does not line up.
- A strap is cut, frayed or burned.
- The part is named in a recall, or you cannot tell whether it is.
- The attachment has failed or nearly failed in use.
Where to report a failure
In the US, file a report on SaferProducts.gov.[3] In Canada, use Health Canada's online consumer incident reporting form.[9] Tell the maker too, with photos, the SKU and the rack it was on.
Next
Questions
Are REP strap safeties recalled?
CPSC recall 21-721 of February 11, 2021 covered about 1,940 REP PR-4000 and PR-5000 strap safety brackets (SKUs PRA-4120 and PRA-5122) sold April to December 2020. It does not cover other REP products or revisions; check the notice against your SKU.[1]
How do I check if my rack attachment is recalled?
Search the CPSC and SaferProducts.gov by brand, model and date, check Health Canada if you are in Canada, and ask the maker with your SKU. The CPSC does not guarantee the accuracy of SaferProducts.gov reports.[3][4]
What should I inspect before lifting?
Follow the maker's manual. Rogue's strap manuals say each hanger's pin notch must be fully seated and all rigging inspected before each use; Oak Club says to check pin installation before each lift.[6][8]
Where do I report a failure?
In the US, on SaferProducts.gov; in Canada, through Health Canada's online consumer incident reporting form. Tell the maker as well.[3][9]
Were Rogue J-cups recalled?
In April 2011 the CPSC announced a recall of about 5,500 Rogue barbell brackets (J-cups) sold March 2009 to December 2010 for SPX, R-3, R-4 and Infinity units. It is historical and does not apply to current products.[2]