Router table
Kreg PRS1025 router table top: plate, rings, lift and fence
Kreg PRS1025 router table top: its size, how Kreg supports the plate, Level-Loc rings, the PRS1015 fence, and INCRA's adapter note for its lift.
Also listed as Kreg PRS1025, Kreg Precision Router Table, Kreg router table top
We may earn a commission if you buy through links on this page. How we make money
Short answer
Kreg lists the PRS1025 top at 1-1/16 x 24 x 32 in, made of MDF, melamine and aluminum. Kreg says its PRS5000 lift fits all Kreg router tables, and its PRS1015 fence is designed for a 32 in table width. INCRA says Kreg tables lack a rabbeted ledge, so its Mast-R-Lift II needs INCRA's CleanSweep Table Adapter.
What fits
- Router liftKreg PRS5000 Precision Router LiftCheck price on Amazon
- Router table fenceKreg PRS1015 Precision Router Table FenceCheck price on Amazon
- Level-Loc ring setKreg PRS3050 Level-Loc reducing ring set (5‑piece)Check price on Amazon
Key facts
- Plate opening or plate outline
- Kreg's regional PRS1025 page lists the included insert plate at 9.5 x 235 x 298 mm. Kreg's PRS5000 lift plate is 3/8 x 9-1/4 x 11-3/4 in.[1][2]The regional page lists metric parts; North American kit contents may differ.
- Plate thickness
- Kreg regional page: 9.5 mm plate. Kreg PRS5000 lift plate: 3/8 in.[1][2][3]3/8 in is 9.525 mm by arithmetic; maker metric labels may round differently.
- Corner radius
- Not confirmedThe PRS1025 page states no corner radius. Kreg's insert-plate manual shows 3/4 in radius corners for its own plate outline, which is not a general standard.
- Plate support and leveling
- Kreg's plate instructions: a rabbeted opening, or a straight-sided opening with PRS3040 levelers attached under the top. Kreg's leveler screws are meant for tops at least 1 in thick. The regional PRS1025 page lists four leveling elements.[4][5][6][1]Kreg's Q&A says the PRS3040 levelers work only with Kreg plates.
- Insert ring system
- Kreg Level-Loc: Kreg lists its PRS3050 rings for the Kreg Precision Router Table Insert Plate and the PRS5000 lift. The regional PRS1025 page lists metric reduction rings.[7][1]Kreg names only its own plate and lift for these rings.
- Guide bushings
- Kreg's PRS4034/4036/4038 plates include a 1-3/16 in Level-Loc ring that accepts standard universal-style guide bushings.[4]That ring comes with Kreg's separate insert plates; the PRS1025 kit's rings were listed in metric on the regional page.
- Miter or accessory slot
- Not confirmedThe PRS1025 page read gives no slot dimensions.
- Fence fit and mounting
- Kreg PRS1015 fence: 36 in overall, single-side mounting on tops 3/4 to 1-1/2 in thick, designed for a 32 in table width with the bit hole 16 in from the table's right side. Kreg lists the PRS1025 as compatible with its fence.[8][1]
- Dust ports and hose fit
- Kreg's Q&A gives the PRS1015 fence's dust port as 2-1/2 in.[8]A Kreg Q&A answer, not the spec table. Hose fit only, not dust capture.
- Routers the table maker lists
- Not confirmedRouter fit depends on the plate or lift; see the Kreg plate and lift listings on each router page.
- Lifts and plates whose makers name it
- Kreg says the PRS5000 lift fits all Kreg router tables. INCRA says Kreg tables lack a rabbeted ledge and need its CleanSweep Table Adapter to support the INCRA Mast-R-Lift II.[2][9][10]Kreg's "fits most standard router tables" wording is marketing, not a cross-brand fit list.
- Top size and material
- 1-1/16 x 24 x 32 in; MDF, melamine and aluminum (Kreg).[1]
- Not confirmed
- Not confirmedNorth American kit contents; the top's corner radius and miter slot; Level-Loc ring outside diameter (Kreg's Q&A gives two figures).
Watch out for
- INCRA says Kreg tables have no rabbeted ledge, so an INCRA Mast-R-Lift II needs INCRA's CleanSweep Table Adapter here.
- Kreg's Q&A says its PRS3040 levelers work only with Kreg plates.
- Kreg's regional page lists metric plate and ring parts; North American kit contents may differ.
What fits
Product details below are the seller's own description unless a source is shown. Pick the variant named for each item.
Router lift
Kreg PRS5000 Precision Router LiftChoose the PRS5000 lift.
Kreg says the PRS5000 fits all Kreg router tables.
Router table fence
Kreg PRS1015 Precision Router Table FenceChoose the 36 in PRS1015 fence.
Kreg designs it for a 32 in table width, and the PRS1025 page lists it as compatible.
Level-Loc ring set
Kreg PRS3050 Level-Loc reducing ring set (5‑piece)Choose the 5-piece PRS3050 set.
Kreg lists these rings for its own insert plate and PRS5000 lift, not other brands' plates.
Questions
Does an INCRA Mast-R-Lift II fit a Kreg router table?
INCRA says Kreg tables lack a rabbeted ledge, so its lift needs the INCRA CleanSweep Table Adapter, which only works with openings sized for a 9-1/4 x 11-3/4 in plate.[9][10]
Does the Kreg PRS5000 lift fit the PRS1025 top?
Kreg says the PRS5000 fits all Kreg router tables.[2]
Will Kreg's PRS3040 levelers work with another brand's plate?
Kreg's Q&A says they work only with Kreg plates, and Kreg's instructions tell users of other plates to follow their plate's instructions.[6][5]
Where does the Kreg PRS1015 fence put the bit?
Kreg designs the fence for a 32 in table width with the bit hole 16 in from the table's right side.[8]