Router
Porter-Cable 7529 and 8529: plates that list them
Porter-Cable 7529 and 8529 plunge routers in a table: the Kreg, INCRA and Woodpeckers plates that list them, and why no lift is confirmed.
Also listed as Porter-Cable 7529, Porter-Cable 8529, Porter-Cable 97529
We may earn a commission if you buy through links on this page. How we make money
Short answer
Kreg, INCRA and Woodpeckers each list the Porter-Cable 7529 and 8529 for an insert plate: Kreg's Pattern 1, INCRA's MLP690890-AL and Woodpeckers' AI890. No lift maker in our sources lists these plunge routers, so a lift is not confirmed.
What fits
- Undrilled plate with Pattern 1 marksKreg PRS4038 Precision Router Table Insert Plate, undrilledCheck price on Amazon
Key facts
- Models this page covers
- Porter-Cable 7529 and 8529, plus the 97529 on Kreg's list.[1]
- Motor body diameter (lift maker's chart)
- Not confirmedNo lift maker's chart in our sources lists these routers.
- Lifts whose maker lists it
- Not confirmedJessEm, INCRA and Kreg lift lists that were read do not name the 7529 or 8529.
- Clamp setting, collar or pads
- Not confirmed
- Predrilled plates that list it
- Kreg PRS4038 Pattern 1 (7529, 97529, 8529); INCRA MagnaLOCK MLP690890-AL (7529/8529); Woodpeckers AI890 (7529, 8529).[1][2][3]
- Above-table adjustment access
- Not confirmedNo maker note on above-table adjuster access for these routers was found.
- Router tables whose maker lists it
- Not confirmedNeither Bosch table page lists these routers.
- Maker exclusions
- Not confirmed
- Availability and recalls
- Not confirmedCurrent availability was not checked.
- Not confirmed
- Not confirmedAny lift fit, and a motor body diameter from a lift maker.
Watch out for
- These routers share a plate pattern with the 690/890 on Kreg's, INCRA's and Woodpeckers' lists, but no lift maker we read lists them, so a shared plate does not mean a shared lift.
What fits
Product details below are the seller's own description unless a source is shown. Pick the variant named for each item.
Undrilled plate with Pattern 1 marks
Kreg PRS4038 Precision Router Table Insert Plate, undrilledChoose the undrilled PRS4038 and use Kreg's Pattern 1.
Kreg's Pattern 1 lists the 7529, 97529 and 8529; follow Kreg's own instructions for the holes.
Questions
Can I put a Porter-Cable 7529 in a router lift?
Not confirmed. None of the lift lists we read (JessEm, INCRA, Kreg) names the 7529 or 8529. Ask the lift maker before buying.