CNC machine
Inventables X-Carve 1000 mm (legacy): router mount notes
What Inventables' legacy X-Carve 1000 mm instructions say about the DeWalt 611 mount, and which upgrade parts were listed as sold out on 2026-10-11.
Also listed as X-Carve 1000 mm, X-Carve
Short answer
Inventables' legacy X-Carve 1000 mm instructions mount a DeWalt 611 router in the spindle mount with three M4 x 16 mm screws; they give no mount diameter. As viewed on 2026-10-11, Inventables listed its Z Axis Kit, 9 mm Belt and Motor Kit and X-Carve Makita Spindle Mount as sold out.
Key facts
- Maker and model
- Inventables X-Carve, 1000 mm (legacy instructions)[1]
- Z axis or slider
- Not confirmed
- Router or spindle it ships with
- DeWalt 611, mounted in the legacy spindle mount with three M4 x 16 mm screws[1]The step gives no mount diameter and does not mention Makita.
- Mount it ships with
- Not confirmed
- Other mounts the maker lists
- X-Carve Makita Spindle Mount, listed as sold out as viewed 2026-10-11[2]The page makes no discontinuation statement.
- Mounts and kits the maker excludes
- Not confirmed
- Spindle kits that name it
- Not confirmed
- Supply the maker's kits require
- Not confirmed
- Collets supplied
- Not confirmed
- Table and workholding thread
- Not confirmed
- Dust boots that name it
- Not confirmed
- Maker support for third-party parts
- Not confirmed
- Revisions and conflicts
- Inventables' upgrades collection listed the Z Axis Kit, 9 mm Belt and Motor Kit and X-Carve Makita Spindle Mount as sold out as viewed 2026-10-11[2]Sold out is not the same as discontinued; Inventables made no discontinuation statement on that page.
- Not confirmed
- Not confirmed
Watch out for
- The legacy instructions give no mount diameter, so measure your mount before buying a router or spindle for it.
- Sold out as viewed 2026-10-11 does not mean discontinued; Inventables made no such statement on that page.
This is a reference for owners, not a machine recommendation. To check the bore yourself, see 69 mm mounts and 71 mm mounts, which both describe DeWalt DWP611 labels.
Questions
What router does the legacy X-Carve 1000 mm use?
Inventables' legacy instructions mount a DeWalt 611 router in the spindle mount, secured with three M4 x 16 mm screws. They do not state the mount diameter.[1]