Cable setup

Spud Inc. Super Econo Pulley: cable, strap pins and what's missing

Spud's Super Econo Pulley is sold without a cable. The 75 in cable, custom lengths, the matching strap loading pins and the ratings Spud does and does not give.

Also listed as Spud Super Econo, Super Econo Pulley

Short answer

Spud Inc. sells the Super Econo Pulley as pulley only; the cable is sold separately. Its 75 in nylon cable suits 6 to 7 ft racks, and Spud makes custom lengths for an extra fee, which can take up to two weeks. Spud's strap loading pins are made for its Econo Pulley Systems and link through an attached ring.

Key facts

Setup type
Pulley, sold without a cable[1]
Racks or supports the maker lists
6 to 7 ft rack heights with the 75 in cable; custom cable lengths for other heights[1]
Maker exclusions
Not confirmed
Mount and hardware
Mounting details not listed by Spud[1]
Resistance and loading
Spud's strap loading pins: a 1 in version for standard plates and an Olympic version for 2 in plates, both linking through an attached ring[2][3]Separate products; do not treat them as interchangeable.
Pull ratio
Not confirmed
Maker's load rating
None listed for the pulley. Spud states up to 550 lb of Olympic plate weight for its Olympic strap pin only[1][3]The 1 in strap pin's rating needs confirming with Spud.
Cable length and diameter
75 in nylon cable, sold separately; custom lengths for an extra fee, up to two weeks to make[1]
Cable travel
Not confirmed
What is included
Pulley only; the cable is sold separately[1]
Connector at the cable end
Not confirmed
Small increments
Not confirmed
Installation the maker requires
Not confirmed
Maker warranty
Not listed[1]
Replacement parts
Not confirmed
Not confirmed
Rated capacity, mounting details and warranty are not listed[1]

Watch out for

  • The cable is not included; order it with the pulley.
  • Spud's 1 in strap pin lists 11 in and 17 in straps, but its description says 12 in and 18 in. Confirm the length with Spud.
  • The 550 lb figure is on the Olympic strap pin's page. The 1 in pin's page repeats it word for word, so treat the 1 in rating as unconfirmed.
  • The Olympic strap pin comes in 12 in and 18 in straps; Spud describes the 18 in for tall racks or ceiling mounts.
  • Spud makes its strap pins for its Econo Pulley Systems and does not list them for other pulleys.

Questions

Does the Super Econo Pulley come with a cable?

No. Spud sells it as pulley only, with the cable sold separately. The 75 in nylon cable suits 6 to 7 ft racks, and custom lengths cost extra and can take up to two weeks.[1]

Which strap pin goes with the Super Econo Pulley?

Spud makes a 1 in strap pin for standard plates and an Olympic strap pin for 2 in plates, both for its Econo Pulley Systems. They are separate products and not interchangeable.[2][3]

How much weight can the Super Econo Pulley take?

Spud lists no rated capacity for the pulley. It states up to 550 lb of Olympic plate weight for its Olympic strap pin only.[1][3]

Sources

  1. Super Econo Pulley · Spud Inc. · Pulley-only package, cable length guidance, custom lengths. · checked 10 Oct 2026
  2. Strap Loading Pin for 1" Plates · Spud Inc. · Maker page for the standard 1-inch-plate strap loading pin (SKU SPUD202): length options, compatibility, stated load. · checked 10 Oct 2026
  3. Strap Loading Pin · Spud Inc. · Maker page for the 2-inch Olympic strap loading pin (SKU SPUD53): 12/18-inch options, compatibility, stated load. · checked 10 Oct 2026

Next review due 9 Jan 2027.