Cable setup
Ironmaster Cable Tower V2/PRO: required bench, rating and contents
The benches the Ironmaster Cable Tower V2/PRO must attach to, its 250 lb rating at 1:1, what comes with it, and why older manual limits do not apply.
Also listed as Ironmaster Cable Tower, Cable Tower V2, Cable Tower PRO
Short answer
Ironmaster says the Cable Tower Attachment V2/PRO must be attached to a Super Bench, Super Bench PRO, PRO V2 or Cable Tower Seat to be used. It lists a 250 lb load rating at a 1:1 ratio, and includes upper and lower pulley cables, Olympic sleeve adapters and a lat bar; handles are sold separately.
Key facts
- Setup type
- Bench-mounted cable tower[1]
- Racks or supports the maker lists
- Super Bench, Super Bench PRO, PRO V2 or Cable Tower Seat[1][2]Ironmaster's FAQ says the Cable Tower Seat allows use of all Cable Tower functions.
- Maker exclusions
- Use without one of the listed benches or the Cable Tower Seat[1]
- Mount and hardware
- Not confirmed
- Resistance and loading
- Olympic sleeve adapters included[1]
- Pull ratio
- 1:1[1]
- Maker's load rating
- 250 lb, from the current V2/PRO product page[1]
- Cable length and diameter
- Upper and lower pulley cables included; length not confirmed[1]
- Cable travel
- Not confirmed
- What is included
- Upper and lower pulley cables, Olympic sleeve adapters and a lat bar; handles sold separately[1]
- Connector at the cable end
- Not confirmed
- Small increments
- Not confirmed
- Installation the maker requires
- Must be attached to a Super Bench, Super Bench PRO, PRO V2 or Cable Tower Seat to be used[1]
- Maker warranty
- Not confirmed
- Replacement parts
- Not confirmed
- Not confirmed
- Not confirmed
Watch out for
- It is not a standalone tower: Ironmaster says it must be attached to a Super Bench, Super Bench PRO, PRO V2 or Cable Tower Seat to be used.
- Ironmaster's older Cable Tower assembly manual covers an earlier assembly. Do not apply its limits to the V2/PRO; use the current product page's 250 lb rating.
- Handles are sold separately; the lat bar is included.
Questions
Can I use the Ironmaster Cable Tower without a Super Bench?
Only on one of the hosts Ironmaster names: the Super Bench, Super Bench PRO, PRO V2 or the Cable Tower Seat. Ironmaster's FAQ says the Cable Tower Seat allows use of all Cable Tower functions.[1][2]
What is the Cable Tower V2's load rating?
Ironmaster lists 250 lb for the Cable Tower Attachment V2/PRO, with a 1:1 ratio. That figure is from the current product page; limits in older manuals do not carry over.[1]
Does the Ironmaster Cable Tower come with handles?
No. Ironmaster includes upper and lower pulley cables, Olympic sleeve adapters and a lat bar, and sells handles separately.[1]