Cable setup
Force USA All-In-One Trainers: fractional plates by region
Force USA's US and UK fractional weight plates for its All-In-One Trainers, the models the UK page names, and why the two are not interchangeable.
Also listed as Force USA fractional plates, Force USA all-in-one
Short answer
Force USA's US fractional plates are a 6 lb pair of 3 lb steel plates that each split into 1.5 lb halves and slide onto the top of its All-In-One Trainer stacks; the US page names no models and says they are sold only at retail locations. Force USA UK sells a 2 x 1.5 kg pair with compatibility verified for the F100 V2, X15 Pro, G15, G20 V2 Pro and C10.
Key facts
- Setup type
- All-in-one trainer with weight stacks[1]
- Racks or supports the maker lists
- UK pair: F100 V2, X15 Pro, G15, G20 V2 Pro and C10 (compatibility verified by Force USA). US pair: All-In-One Trainers, no models named[2][1]
- Maker exclusions
- Not confirmed
- Mount and hardware
- Not confirmed
- Resistance and loading
- Not confirmed
- Pull ratio
- Not confirmed
- Maker's load rating
- Not confirmed
- Cable length and diameter
- Not confirmed
- Cable travel
- Not confirmed
- What is included
- Not confirmed
- Connector at the cable end
- Not confirmed
- Small increments
- US: a 6 lb pair of 3 lb steel plates, each splitting into 1.5 lb halves. UK: a 2 x 1.5 kg steel pair[1][2]Both slide onto the top of the stacks, per Force USA.
- Installation the maker requires
- Not confirmed
- Maker warranty
- Not confirmed
- Replacement parts
- Not confirmed
- Not confirmed
- Not confirmed
Watch out for
- The US (lb) and UK (kg) plates are different products; do not convert one into the other.
- The US page says the plates are sold only at retail locations.