Router table
Rockler and Bench Dog router tables: what lift makers say
Rockler and Bench Dog router tables: INCRA's exclusion of its standard lift, the 8-1/4 x 11-3/4 in lift versions, and the Rockler figures not yet confirmed.
Also listed as Rockler router table, Bench Dog router table, Bench Dog ProMAX
Short answer
INCRA says its standard Mast-R-Lift II versions are not compatible with Rockler or Bench Dog tables, and that a special 8-1/4 x 11-3/4 in version is sold exclusively through Rockler. JessEm sells a Mast-R-Lift II (02121) with an 8-1/4 x 11-3/4 in plate but gives no table list. Rockler's own plate, ring and table figures are not confirmed.
Key facts
- Plate opening or plate outline
- Not confirmedRockler's and Bench Dog's own plate figures could not be read. 8-1/4 in is 209.55 mm by arithmetic.
- Plate thickness
- Not confirmed
- Corner radius
- Not confirmed
- Plate support and leveling
- Not confirmed
- Insert ring system
- Not confirmedRockler's Snap-Lock ring openings could not be read.
- Guide bushings
- Not confirmed
- Miter or accessory slot
- Not confirmed
- Fence fit and mounting
- Not confirmed
- Dust ports and hose fit
- Not confirmed
- Routers the table maker lists
- Not confirmed
- Lifts and plates whose makers name it
- INCRA: its standard Mast-R-Lift II versions are not compatible with Rockler or Bench Dog tables; a special 8-1/4 x 11-3/4 in version is available exclusively through Rockler. JessEm: Mast-R-Lift II 02121 has a smaller 8-1/4 x 11-3/4 in top plate, with no table list.[1][2]
- Top size and material
- Not confirmed
- Not confirmed
- Not confirmedRockler Pro Lift item numbers and plate sizes; Rockler Snap-Lock plate size, thickness and ring opening; Snap-Lock ring sets; Bench Dog ProMAX plate size and saw-wing limits. Rockler's pages could not be read.
Watch out for
- INCRA says its standard Mast-R-Lift II is not compatible with Rockler or Bench Dog tables.
- JessEm's 02121 has an 8-1/4 x 11-3/4 in plate, but JessEm names no table for it; measure your opening before buying.
- Rockler's Snap-Lock rings are Rockler's own system; no maker says they swap with another brand's rings.
Questions
Does an INCRA Mast-R-Lift II fit a Rockler table?
INCRA says its standard versions are not compatible with Rockler or Bench Dog tables, and that a special 8-1/4 x 11-3/4 in version is sold exclusively through Rockler.[1]
Is there a JessEm lift with an 8-1/4 in plate?
Yes. JessEm lists the Mast-R-Lift II 02121 with a smaller 8-1/4 x 11-3/4 in top plate, but its page gives no table-fit list.[2]
What size is a Rockler Snap-Lock plate?
Not confirmed. Rockler's pages could not be read, so we do not publish its plate or ring figures yet. Measure your table's opening.