Pick your tank's size or type to see how a feeder mounts, where the air pump and check valve go, which water-change tool fits and what to set up before time away, from maker manuals and published sources, with the limits stated.
No independent data shows how reliably any consumer feeder works, and capacity is not trip length. Fish Mate itself recommends supervising a new F14 for fourteen days while you are home before relying on it.
A pump below the water with no check valve
When the power stops, water can siphon back down the airline into a pump that sits below the water level. Run the pump above the tank, or fit a check valve the right way round in the airline outside the water.
No drip loop on the cords
Water runs down power cords. Aquarium makers tell you to loop each cord below the outlet so water drips off before it reaches the plug, and to keep every plug dry.
Fixing a 230 V pump with a plug adapter
Some aquarium pumps are made only for 230-240 V / 50 Hz mains. A plug adapter changes the plug, not the voltage. In the US, choose the variant rated 120 V / 60 Hz.
We start from your tank and the job, not the product. Specifications come from maker manuals and pages, standards bodies and published measurements, and each one is labeled with its source; a maker's figure and an independent measurement are never mixed. For anything that plugs in, we look for the exact 120 V / 60 Hz variant and the certification the maker actually states, and a seller tied to the brand. Nothing here has been tested by us, we make no feeder-reliability or livestock-safety claims, and we do not cover heaters or other life-support devices.
